How to choose the right double sided tape for your business ?

2022-10-24

Speaking of double-sided tape,there are many different options available on the market.Here share 4 steps to teach you how to choose the right double sided tape for your business:

Step 1:What are the two surface you are bonding?

Choose the right double-sided tape begins by evaluating the surface characteristics of the two substrates you’re trying to stick together.For example,the flatter and smoother the surfaces are,like glass,aluminum,PVC,the thinner tape can be.Conversely,the rougher the surfaces are,like wood,cement,brick,stucco,the thicker the rough surface adhesive tape needs to be to provide adequate contact.

Step 2: What is your surface energy?

All surfaces have a property known as surface energy,the degree of attraction or repulsion force of a material surface exerts on another material.Substrates with a
high surface energy form very good surfaces for bonding,like glass,glaze tile,and bare metals,Plastic can vary from reasonably easy to very poor.For example,polypropylene and polyethylene are very hard to stick to and call for a higher adhesion and a very tacky adhesive.

Conversely,a material like silicone has such “low surface energy” that conventional adhesives won’t stick it at all.Working with this material would,therefore,require an incredibly tacky and silicone adhesive.

It is also important to take a treated surfaces into consideration .For example,if a surface is coated with paint,the tape might stick well to the coating,but it there is a weak bond(low surface energy) underneath,the tape and the paint might peel off.

Steps:What temperature resistance do you need ?

Next ,take your environmental into consideration and choose a temperature-resistance tape.The tackiness of the adhesive tape is very temperature-dependent,and the colder the conditions,the proper the bond will be .if you must work at a lower temperatures,then use a double-sided tape specifically designed for colder climates.The same hold true for extremely hot or wet conditions.

Step 4:What other conditions should I consider ?

When choose the best double-sided tape for your business,please double check the key detais as below:

1)How long do you need the tape to hold ?Meaning,do you need a temporary or permanent solution?
2)If you need to remove the tape,do you need it to be clean removal?
3)What will the tape be exposed to while you’re appling it ,and afterward?
4)Does the tape need to be a certain thickness for the application to work?
5)What width and length do you need ?
6)Are there any specifications you need

What it all boils down to is knowng there there things:your job,your materials and your filed conditions.Only then can you match the right adhesive with your project and decide if you need heat resistance ,extra wide,or specialty outdoor double-sided tape.

What is the difference between cold lamination and hot lamination ?

How to remove double-sided foam tape ?

What is the difference between cold lamination and hot lamination ?

How to remove double-sided foam tape ?